スプリング フォーク アッセンブリー 28" FULL クローム 1936-1952 WL ハーレー 49-2413
メーカー品番 :
メーカー・ブランド名 : V-Twin
原産国 : TAIWAN
OEM No:
インナー&アウタースプリング、クロームフロント&リアレッグ、3/8 "アクスル用インサイドブラックロッカーを含む。インターナルブレーキホイール用。すべてのスタッド、ブッシュ、ブッシュ付きスプリングロッドを含む。
7/8 "ネック用。トップクランプ、ネックレース、コーンナットは付属しません。組み立てが必要な場合があります。リアレッグの1 "チューブには3/4"-16のタップが施され、ねじ込み式ライザーブッシュセットに対応している。45ロッカーはフォークレッグのボードにマウントされ、3/8 "径のアクスルを受け入れる。ロッカー間の距離は6.5インチ。これらのフォークは、電気溶接とろう付けされた構造の純正ユニットのレプリカであり、詳細なレプリカの外観のために、すべてのオリジナルスタイルのコンポーネントやアクセサリーを受け入れることができます。*注:UPSはこのパーツを実際の重量よりも "オーバーサイズ "に梱包して発送するため、送料が高くなる場合があります。*注:リアレッグ(チューブ)の上端からフロントアクスルのセンターラインまでを計測しています。
適合車種
WL 1936-1952 ハーレー
UOM : 1 - EA
Measurements :
| Neck Stem: 7/8" | Legnth: 18" |
Manufacturer : V-Twin
Origin : Imported
2025 Catalog Pages : 779
Replacement Items :
49-0235 - Rebuild Kit
13-1937 - Spring Fork Outer Springs
7706-2 - Cadmium Spring Rod Bushing
Tech Note :
Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging.
*NOTE: 45" Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8" axle. 45" Servi-Cars, 1947-1957,use Big Twin rockers on the outside of the fork.
How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
ease of installation.
取り扱い説明書または図面を表示するにはここをクリックしてください
OEM品番のお話V-TWIN カタログダウンロード