スプリング フォーク アッセンブリー 28" クローム 1936-1957 G/ W ハーレー 49-1763
メーカー品番 :
メーカー・ブランド名 : V-Twin
原産国 : TAIWAN
OEM No:
クロームスプリングフォークアッセンブリーは、インナースプリング付き。フォークのステムは7/8 "で取り外し不可。
*注:ロッカーセットは付属していませんので、必要に応じて別途ご注文ください。3/8 "アクスルホールを持つ45ソロ用ロッカーは、7/16 "スレッドスタッドを使用してフォークレッグの内側に取り付けられています。1941-57 Servi-Car用途のオフセットロッカーは、5ボルトラグのスターハブホイールと1/2インチのスタッドにボルトオンでフォークの外側に取り付けます。ロッカーマウントの穴は7/16 "に開けられていますが、オフセットロッカーの場合は1/2 "に拡大する必要があります。ロッカー間の距離は6.5 "このアイテムは、上向きの切り株を持つ純正バーの中央部分を再現しています。また、4-3/4 "センターの穴がある純正タイプのトリプルクランプを使用するように設計されたオフセットネックポストを持つアフターマーケットのカスタムスプリングフォークにも適合します。インラインまたはオフセット構成のステリングス&ヘリングス製ライザーと組み合わせて使用する。*注:リアレッグ(チューブ)の上端からフロントアクスルのセンターラインまでを計測しています。
適合車種
G 1941-1957 ハーレー
Chief 1937-1952 ハーレー
G 1936-1940 with inside rockers ハーレー
W 1936-1952 ハーレー
UOM : 1 - KIT
Measurements :
Manufacturer : V-Twin
Origin : Imported
2025 Catalog Pages : 779
Tech Note :
Suggested to use with #49-2582 Rocker Set Black for offset rockers.
Suggested to use with #49-0335 Fork Rocker Set Black for inside rockers.
How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
ease of installation.
取り扱い説明書または図面を表示するにはここをクリックしてください
OEM品番のお話V-TWIN カタログダウンロード